在Ubuntu上的Predator Sense


1

我有acer Predator helios 300 PH315-51。我希望轉為全職Ubuntu,並刪除Windows10。但是,唯一讓我退縮的是Predator Sense軟件,該軟件僅適用於Windows 10。它基本上使您可以控制風扇速度並監視CPU和GPU溫度。我設法獲得了其他第三方應用程序來監視溫度,但是找不到用於控制風扇速度的軟件。有什麼方法可以在Ubuntu或任何其他軟件上安裝Predator Sense來控制風扇速度。

編輯1:
我嘗試使用wine,但是當我出於掠食者的感覺運行安裝文件時,有一個正在加載的游標,然後它消失了。就是這樣。我嘗試多次運行。

編輯2:
我嘗試使用fancontrol,但是當我運行sudo pwmconfig時,出現以下錯誤。

This program will search your sensors for pulse width modulation (pwm)
controls, and test each one to see if it controls a fan on
your motherboard. Note that many motherboards do not have pwm
circuitry installed, even if your sensor chip supports pwm.

We will attempt to briefly stop each fan using the pwm controls.
The program will attempt to restore each fan to full speed
after testing. However, it is ** very important ** that you
physically verify that the fans have been to full speed
after the program has completed.

/usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed

編輯3:
基本上,鑑於lm-sensors無法檢測到我筆記本電腦的風扇,我仍然在尋找一種通過某種兼容性層或任何其他可用的風扇控制方法在Ubuntu上運行Predator Sense的方法。

0

You could try if fancontrol works for you:

Installation:

sudo apt-get install fancontrol 

Configuration:

sudo pwmconfig 

Here you can find and select the fan you want to control and the sensor that should be used to measure the temperature.

If fancontrol works for you you should enable it with this:

sudo systemctl enable fancontrol 

fancontrol is sometimes tricky (at least on thinkpad in my experience) but give it a try!

BTW (you didn't ask but I'll tell you anyway ;-))

For monitoring temperatures and fan speed I use lm-sensors with psensor: Installation and configuration:

sudo apt-get install lm-sensors psensor
sudo sensors-detect
sudo service kmod start 

sensors-detect will ask you for all sensors that are found if you want to use them. Go for the default, except in the last step when it asks you

Do you want to add these lines automatically to /etc/modules? (yes/NO)

type in yes and press ENTER. Good luck!